You could access this page securely.

API documentation for libmpg123, libout123, and libsyn123

Note: This API doc is automatically generated from the current development version that you can get via Subversion or as a daily snapshot from http://mpg123.org/snapshot. There may be differences (additions) compared to the latest stable release. See NEWS.libmpg123, NEWS.libout123, NEWS.libsyn123, and the overall NEWS file on libmpg123 versions and important changes between them.
Let me emphasize that the policy for the lib*123 family is to always stay backwards compatible -- only additions are planned (and it's not yet planned to change the plans;-).
syn123 library API

Macros

#define SYN123_DB_LIMIT   500
 
#define SYN123_IOFF(sample, channel, channels)   ((sample)*(channels)+(channel))
 

Typedefs

typedef struct syn123_struct syn123_handle
 
typedef ssize_t syn123_ssize_t
 

Enumerations

enum  syn123_error {
  SYN123_OK = 0 , SYN123_BAD_HANDLE ,
  SYN123_BAD_FMT , SYN123_BAD_ENC ,
  SYN123_BAD_CONV , SYN123_BAD_SIZE ,
  SYN123_BAD_BUF , SYN123_BAD_CHOP ,
  SYN123_DOOM , SYN123_WEIRD ,
  SYN123_BAD_FREQ , SYN123_BAD_SWEEP ,
  SYN123_OVERFLOW , SYN123_NO_DATA ,
  SYN123_BAD_DATA
}
 
enum  syn123_wave_id {
  SYN123_WAVE_INVALID = -1 , SYN123_WAVE_FLAT = 0 ,
  SYN123_WAVE_SINE , SYN123_WAVE_SQUARE ,
  SYN123_WAVE_TRIANGLE , SYN123_WAVE_SAWTOOTH ,
  SYN123_WAVE_GAUSS , SYN123_WAVE_PULSE ,
  SYN123_WAVE_SHOT , SYN123_WAVE_LIMIT
}
 
enum  syn123_sweep_id {
  SYN123_SWEEP_LIN = 0 , SYN123_SWEEP_QUAD ,
  SYN123_SWEEP_EXP , SYN123_SWEEP_LIMIT
}
 

Functions

MPG123_EXPORT const char * syn123_distversion (unsigned int *major, unsigned int *minor, unsigned int *patch)
 
MPG123_EXPORT unsigned int syn123_libversion (unsigned int *patch)
 
const char * syn123_strerror (int errcode)
 
MPG123_EXPORT syn123_handlesyn123_new (long rate, int channels, int encoding, size_t maxbuf, int *err)
 
MPG123_EXPORT void syn123_del (syn123_handle *sh)
 
MPG123_EXPORT int syn123_dither (syn123_handle *sh, int dither, unsigned long *seed)
 
MPG123_EXPORT size_t syn123_read (syn123_handle *sh, void *dst, size_t dst_bytes)
 
MPG123_EXPORT int syn123_setup_waves (syn123_handle *sh, size_t count, int *id, double *freq, double *phase, int *backwards, size_t *period)
 
MPG123_EXPORT int syn123_query_waves (syn123_handle *sh, size_t *count, int *id, double *freq, double *phase, int *backwards, size_t *period)
 
MPG123_EXPORT const char * syn123_wave_name (int id)
 
MPG123_EXPORT int syn123_wave_id (const char *name)
 
MPG123_EXPORT int syn123_setup_sweep (syn123_handle *sh, int wave_id, double phase, int backwards, int sweep_id, double *f1, double *f2, int smooth, size_t duration, double *endphase, size_t *period, size_t *buffer_period)
 
MPG123_EXPORT int syn123_setup_pink (syn123_handle *sh, int rows, unsigned long seed, size_t *period)
 
MPG123_EXPORT int syn123_setup_white (syn123_handle *sh, unsigned long seed, size_t *period)
 
MPG123_EXPORT int syn123_setup_geiger (syn123_handle *sh, double activity, unsigned long seed, size_t *period)
 
MPG123_EXPORT int syn123_setup_silence (syn123_handle *sh)
 
MPG123_EXPORT int syn123_conv (void *MPG123_RESTRICT dst, int dst_enc, size_t dst_size, void *MPG123_RESTRICT src, int src_enc, size_t src_bytes, size_t *dst_bytes, size_t *clipped, syn123_handle *sh)
 
MPG123_EXPORT double syn123_db2lin (double db)
 
MPG123_EXPORT double syn123_lin2db (double volume)
 
MPG123_EXPORT int syn123_amp (void *buf, int encoding, size_t samples, double volume, double offset, size_t *clipped, syn123_handle *sh)
 
MPG123_EXPORT size_t syn123_clip (void *buf, int encoding, size_t samples)
 
MPG123_EXPORT size_t syn123_soft_clip (void *buf, int encoding, size_t samples, double limit, double width, syn123_handle *sh)
 
MPG123_EXPORT void syn123_interleave (void *MPG123_RESTRICT dst, void **MPG123_RESTRICT src, int channels, size_t samplesize, size_t samplecount)
 
MPG123_EXPORT void syn123_deinterleave (void **MPG123_RESTRICT dst, void *MPG123_RESTRICT src, int channels, size_t samplesize, size_t samplecount)
 
MPG123_EXPORT void syn123_mono2many (void *MPG123_RESTRICT dst, void *MPG123_RESTRICT src, int channels, size_t samplesize, size_t samplecount)
 
MPG123_EXPORT int syn123_mixenc (int src_enc, int dst_enc)
 
MPG123_EXPORT int syn123_mix (void *MPG123_RESTRICT dst, int dst_enc, int dst_channels, void *MPG123_RESTRICT src, int src_enc, int src_channels, const double *mixmatrix, size_t samples, int silence, size_t *clipped, syn123_handle *sh)
 
MPG123_EXPORT int syn123_setup_filter (syn123_handle *sh, int append, unsigned int order, double *b, double *a, int mixenc, int channels, int init_firstval)
 
MPG123_EXPORT int syn123_query_filter (syn123_handle *sh, size_t position, size_t *count, unsigned int *order, double *b, double *a, int *mixenc, int *channels, int *init_firstval)
 
MPG123_EXPORT void syn123_drop_filter (syn123_handle *sh, size_t count)
 
MPG123_EXPORT int syn123_filter (syn123_handle *sh, void *buf, int encoding, size_t samples)
 
MPG123_EXPORT int syn123_setup_resample (syn123_handle *sh, long inrate, long outrate, int channels, int dirty, int smooth)
 
MPG123_EXPORT long syn123_resample_maxrate (void)
 
MPG123_EXPORT size_t syn123_resample_count (long inrate, long outrate, size_t ins)
 
MPG123_EXPORT size_t syn123_resample_history (long inrate, long outrate, int dirty)
 
MPG123_EXPORT size_t syn123_resample_incount (long input_rate, long output_rate, size_t outs)
 
MPG123_EXPORT size_t syn123_resample_fillcount (long input_rate, long output_rate, size_t outs)
 
MPG123_EXPORT size_t syn123_resample_maxincount (long input_rate, long output_rate)
 
MPG123_EXPORT size_t syn123_resample_out (syn123_handle *sh, size_t ins, int *err)
 
MPG123_EXPORT size_t syn123_resample_in (syn123_handle *sh, size_t outs, int *err)
 
MPG123_EXPORT int64_t syn123_resample_total64 (long inrate, long outrate, int64_t ins)
 
MPG123_EXPORT int64_t syn123_resample_intotal64 (long inrate, long outrate, int64_t outs)
 
MPG123_EXPORT size_t syn123_resample (syn123_handle *sh, float *MPG123_RESTRICT dst, float *MPG123_RESTRICT src, size_t samples)
 
MPG123_EXPORT void syn123_swap_bytes (void *buf, size_t samplesize, size_t samplecount)
 
MPG123_EXPORT void syn123_host2le (void *buf, size_t samplesize, size_t samplecount)
 
MPG123_EXPORT void syn123_host2be (void *buf, size_t samplesize, size_t samplecount)
 
MPG123_EXPORT void syn123_le2host (void *buf, size_t samplesize, size_t samplecount)
 
MPG123_EXPORT void syn123_be2host (void *buf, size_t samplesize, size_t samplecount)
 
MPG123_EXPORT syn123_ssize_t syn123_resample_expect (syn123_handle *sh, size_t ins)
 
MPG123_EXPORT syn123_ssize_t syn123_resample_inexpect (syn123_handle *sh, size_t outs)
 
MPG123_EXPORT off_t syn123_resample_total (long inrate, long outrate, off_t ins)
 
MPG123_EXPORT off_t syn123_resample_intotal (long inrate, long outrate, off_t outs)
 

Detailed Description

I wanted to create some test signals in different encodings for testing libout123. Also, they shall serve to verify the decoding of libmpg123 in automated testing. Then, the awful drop-sample resampling inside the latter needed replacement. As digital filtering is part of the resampler dance, a chain of those can also be configured and applied. I hope I can avoid adding yet more functionality. It's a little utility library to accompany libmpg123 and libout123, OK?

This is what libsyn123 offers:

The usage model for signal generation is this:

  1. Create handle with desired output format.
  2. Set up synthesis mode with parameters.
  3. Repeatedly extract buffers with PCM samples.

If your hardware is slow on floating point operations, you may benefit from the period buffer in the handle that only needs actual computation once in the setup function. The frequencies of a wave mix may be fudged a bit to make for a configured period size.

The usage model for resampling is this:

  1. Create handle with any format or re-use a signal generation handle.
  2. Set up resampling (rate ratio, channels, dirty mode).
  3. Use predictor functions to work out matching sizes of input and output buffers.
  4. Call the resampler on chunks of input, immediately producing matching chunks of output.

The resampler works on 32 bit float, exclusively. This is what is required and appropriate for the provided quality.

The usage model for filtering is this:

  1. Create or re-use a handle.
  2. Set up the filter chain for single or double precision floating point.
  3. Apply the filter to chunks of input in succession.

Computations are generally done in floating point, either 32 bit or 64 bit (single or double precision). The functions for encoding conversion, (de-)interleaving, and interleaved mixing can work without a handle and only use the buffers you hand in. Some support using a syn123 handle to provide the temporary buffers for encoding conversion on the fly to apply flotating-point processing to integer encodings.

Only the functions that are able to return a success code do check arguments for obvious trouble like NULL pointers. You are supposed to act responsibly when calling.

The size of buffers is either counted in bytes or samples, which, depending on the context, refer to individual PCM samples or to what is more strictly called a frame (one sample for each channel counted together).

Macro Definition Documentation

◆ SYN123_DB_LIMIT

#define SYN123_DB_LIMIT   500

The range of decibel values handled by syn123 goes from -SYN123_DB_LIMIT to +SYN123_DB_LIMIT This value ensures that a resulting linear volume can still be expressed using single-precision float. The resulting amplitude from -500 dB is still small enough to drive a 32 bit integer sample value orders of magnitude below 1, so it is effectively a zero. Note that physical volume controls typically give a range as small as 60 dB. You might want to present a tighter range to the user than +/- 500 dB!

Definition at line 515 of file syn123.h.

◆ SYN123_IOFF

#define SYN123_IOFF (   sample,
  channel,
  channels 
)    ((sample)*(channels)+(channel))

A little helper/reminder on how interleaved format works: Produce the offset of the given sample for the given channel.

Definition at line 643 of file syn123.h.

Typedef Documentation

◆ syn123_handle

typedef struct syn123_struct syn123_handle

Typedef shortcut as preferrend name for the handle type.

Definition at line 1 of file syn123.h.

Enumeration Type Documentation

◆ syn123_error

Functions that return an integer success code either return SYN123_OK if everything went fine, or one of the other detailed error codes.

Enumerator
SYN123_OK 

no error

SYN123_BAD_HANDLE 

bad handle given (NULL)

SYN123_BAD_FMT 

bad format (rate/channels)

SYN123_BAD_ENC 

bad encoding given

SYN123_BAD_CONV 

unsupported conversion

SYN123_BAD_SIZE 

buffer size bad (too small)

SYN123_BAD_BUF 

bad buffer pointer (NULL)

SYN123_BAD_CHOP 

byte buffer not cut at sample boundaries

SYN123_DOOM 

Disaster, Out Of Memory.

SYN123_WEIRD 

An internal error that should never occur.

SYN123_BAD_FREQ 

Invalid wave frequency given.

SYN123_BAD_SWEEP 

Invalid sweep curve given.

SYN123_OVERFLOW 

Some fatal (integer) overflow that prevents proper operation.

SYN123_NO_DATA 

Not enough data to do something.

SYN123_BAD_DATA 

Data present, but not usable.

Definition at line 173 of file syn123.h.

◆ syn123_wave_id

Wave types

Enumerator
SYN123_WAVE_INVALID 

invalid wave pattern

SYN123_WAVE_FLAT 

flat line, silence

SYN123_WAVE_SINE 

sinusodial wave

SYN123_WAVE_SQUARE 

square wave

SYN123_WAVE_TRIANGLE 

triangle wave

SYN123_WAVE_SAWTOOTH 

sawtooth wave

SYN123_WAVE_GAUSS 

Gaussian bell shape

SYN123_WAVE_PULSE 

pulse shape, x^2 exp(-A x^2)/S

SYN123_WAVE_SHOT 

shot (sharper pulse), x^2 exp(-A x)/S (different values for A and S)

SYN123_WAVE_LIMIT 

valid IDs below that. A newer release of the library might support more.

Definition at line 251 of file syn123.h.

◆ syn123_sweep_id

Types of frequency sweeps. There are no functions mapping those to/from strings, as this list is supposed to be fixed and small. There are only so many types of sweeps that make sense.

Enumerator
SYN123_SWEEP_LIN 

linear frequency change

SYN123_SWEEP_QUAD 

quadratic frequency change

SYN123_SWEEP_EXP 

exponential (octave per time unit)

SYN123_SWEEP_LIMIT 

valid IDs less than that

Definition at line 367 of file syn123.h.

Function Documentation

◆ syn123_distversion()

MPG123_EXPORT const char* syn123_distversion ( unsigned int *  major,
unsigned int *  minor,
unsigned int *  patch 
)

Get version of the mpg123 distribution this library build came with. (optional means non-NULL)

Parameters
majoroptional address to store major version number
minoroptional address to store minor version number
patchoptional address to store patchlevel version number
Returns
full version string (like "1.2.3-beta4 (experimental)")

◆ syn123_libversion()

MPG123_EXPORT unsigned int syn123_libversion ( unsigned int *  patch)

Get API version of library build.

Parameters
patchoptional address to store patchlevel
Returns
API version of library

◆ syn123_strerror()

const char* syn123_strerror ( int  errcode)

Give a short phrase explaining an error code.

Parameters
errcodethe code returned by an API function
Returns
error phrase

◆ syn123_new()

MPG123_EXPORT syn123_handle* syn123_new ( long  rate,
int  channels,
int  encoding,
size_t  maxbuf,
int *  err 
)

Create new handle with specified output format.

Parameters
ratesampling rate
channelschannel count (duplicated mono channels)
encodingsample encoding (see enum mpg123_enc_enum)
maxbufmaximum buffer size in bytes to allow for caching periodic signals. When this is given, it is attempted to fit any configured signal into this buffer in the hope it will work being played periodically. Maybe there will be tricks with non-periodic signals. A buffer size of zero turns off buffering and signals are always generated during extraction.
erraddress to store error code, non-NULL if you care
Returns
Pointer to allocated handle structure or NULL on error.

◆ syn123_del()

MPG123_EXPORT void syn123_del ( syn123_handle sh)

Delete a handle.

Parameters
shthe handle to delete

◆ syn123_dither()

MPG123_EXPORT int syn123_dither ( syn123_handle sh,
int  dither,
unsigned long *  seed 
)

Enable/disable dithering for conversions.

The default is no dither for conversions to integer encodings. You can enable dithering after handle creation, or disable it, as you wish. Enabling the dither resets the random number generator seed to the provided value or an internal default if the provided value is zero. The dither noise is unfiltered with triangular distribution (TPDF), as a sensible common choice. No further filtering of questionable benefit.

Parameters
shhandle to work on
ditherDisable (0) or enable (1, actually nonzero) dithering. Positive values > 1 may trigger differing dither modes in future, but not now.
seedoptional address to read the initial seed value from (if non-zero) and to write the current value to

◆ syn123_read()

MPG123_EXPORT size_t syn123_read ( syn123_handle sh,
void *  dst,
size_t  dst_bytes 
)

Extract desired amount of data from the generator.

Parameters
shhandle
dstdestination buffer
dst_bytesnumber of bytes to extract
Returns
actual number of extracted bytes (might differ if dst_bytes is no multiple of the PCM frame size)

◆ syn123_setup_waves()

MPG123_EXPORT int syn123_setup_waves ( syn123_handle sh,
size_t  count,
int *  id,
double *  freq,
double *  phase,
int *  backwards,
size_t *  period 
)

Setup periodic wave generator. This sets up a series of oscillators with differing wave shapes. They are multiplied/scaled with each other instead of mixed in a sum of signals. It's more fun this way to generate interesting sounds. If you want to mix differing streams with differing volumes, channel balance and phase shifts, just create multiple single-channel generators with a convenient format (float encoding comes to mind) and mix to your heart's desire. You can then still use this library to get your channel buffers interleaved and converted to something your output device likes.

You can ensure strict periodicity without possible shifts in phases due to floating point rounding errors with the buffered variant. That may adjust your chosen frequencies to be able to keep the limit on buffer size, but the resulting data is then strictly periodic without any further computations that may introduce timing errors. Apart from possibly saving computing time via the precomputed table, this is the reason to pre-mix multiple waves into a common buffer at all.

The adjustments of the wave frequencies also include limiting them between some minimal value and the Nyquist frequency. Without the buffer, you can happily choose waves that are not resolved at all by the sampling rate and get the nasty results. Things get nasty inside the buffer, too, when you approach the Nyquist limit, but that is life (and mathematics).

The default wave is a 440 Hz sine without phase offset. If any setting is missing, the default is taken from that.

Parameters
shhandle
countnumber of waves (if zero, one default wave is configured)
idarray of wave IDs (enum syn123_wave_id), may be NULL
freqarray of wave frequencies, may be NULL Your provided frequencies are overwritten with the actual values if the periodic buffer is chosen.
phasearray of wave phases, may be NULL
backwardsarray of true (non-zero) or false (zero), indicating whether the wave is being inverted in time, may be NULL
periodaddress to store the size of the period buffer in samples (zero if not using the buffer), ignored if NULL
Returns
success code

◆ syn123_query_waves()

MPG123_EXPORT int syn123_query_waves ( syn123_handle sh,
size_t *  count,
int *  id,
double *  freq,
double *  phase,
int *  backwards,
size_t *  period 
)

Query current wave generator setup and state.

This lets you extract the setup of the wave generator and the current phases to be able to re-create it and continue seamlessly, or maybe intentionally in some tweaked form with slight phase or frequency shifts.

You only need to set target pointers to non-NULL where you want the corresponding values extracted. You need to have the storage prepared for the correct wave count. A common mode of usage might be to make a first call to only query the count, allocate storage, then a do a second call for the wave data.

Parameters
shhandle
countaddress to store number of waves
idstorage for array of wave IDs
freqstorage for array of wave frequencies
phasestorage for array of wave phases
backwardsstorage for array of true (non-zero) or false (zero), indicating whether the wave is being inverted in time
periodaddress to store the size of the period buffer in samples (zero if not using the buffer)
Returns
success code

◆ syn123_wave_name()

MPG123_EXPORT const char* syn123_wave_name ( int  id)

Return the name of the indicated wave pattern.

Parameters
idThe numerical ID of the wave pattern (out of enum syn123_wave_id).
Returns
The name string, guaranteed to be non-NULL. Invalid codes yield the string "???".

◆ syn123_wave_id()

MPG123_EXPORT int syn123_wave_id ( const char *  name)

Return the wave pattern id given a name string.

Parameters
nameThe name string.
Returns
The numerical id (out of enum syn123_wave_id).

◆ syn123_setup_sweep()

MPG123_EXPORT int syn123_setup_sweep ( syn123_handle sh,
int  wave_id,
double  phase,
int  backwards,
int  sweep_id,
double *  f1,
double *  f2,
int  smooth,
size_t  duration,
double *  endphase,
size_t *  period,
size_t *  buffer_period 
)

Frequency sweep generator. This generates a sweep from one frequency to another with one of the available wave shapes over a given time. While you can just extract your single sweep by exactly reading the requestet duration, the generator is set up to run the sweep a bit longer until the beginning phase is reached again (one sample before that, of course). That way, reasonably smooth periodic playback from the buffer is possible without that nasty jump. Still, a large freqency difference will result in an audible pop, but at least that is not whole spectrum due to a phase jump.

Parameters
shhandle
wave_idwave ID (enum syn123_wave_id)
f1pointer to beginning frequency in Hz (>= 1e-4, please, a value <= 0 being replaced by the standard frequency and stored for you)
f2ending frequency in Hz (>= 1e-4, please, in case of exponential sweep: f2-f1 >= 1e-4, too, a value <= 0 being replaced by the standard frequency and stored for you)
sweep_idchoice of sweep curve (enum syn123_sweep_id)
smoothenable the periodic smoothing, if sensible (extending signal beyond the sweep to avoid phase jumps, a continuing starting at given start phase, not the returned endphase)
durationduration of sweep in samples (> 1, please) This theoretically should be an off_t relating to the size of a file you produce, but off_t in API headers causes headaches. A 32 bit size_t still gives you over 24 hours of sweeping with 44100 kHz rate. On top of that, you can use the returned endphase to chop your monster sweep into pieces.
phaseinitial phase of the sweep
backwardsinvert the waveform in time if true
endphaseaddress to store the normal phase that would smoothly continue the signal without the period correction (You can create a following sweep that continues smoothly to a new target frequency by handing in this endphase as initial phase. Combine that with phases of constant tone and you could simulate a Theremin player by approximating the reaction to hand movements via sweeps.)
periodaddress to store the periodic sample count, usually being a bit bigger than the duration for getting the phase back down; does not imply use of the internal period buffer
buffer_periodaddress to store the period count only if the period buffer is actually in use

◆ syn123_setup_pink()

MPG123_EXPORT int syn123_setup_pink ( syn123_handle sh,
int  rows,
unsigned long  seed,
size_t *  period 
)

Set up pink noise generator. This employs the Gardner/McCartney method to the approximate the real thing. The number of rows in the tree pattern is tunable. The result is pink noise with around 2.5 dB/octave. Do not expect more than 32 bits of randomness (or anything;-).

Parameters
shhandle
rowsrows for the generator algorithm It maxes out at 30 rows. Below 1 chooses a default.
seeda 32 bit seed value for the pseudo-random number generator
periodoptional address to store the size of the enforced period (zero for endlessly freshly generated signal)
Returns
success code

◆ syn123_setup_white()

MPG123_EXPORT int syn123_setup_white ( syn123_handle sh,
unsigned long  seed,
size_t *  period 
)

Set up white noise generator. A simple white noise source using some cheap pseudo RNG. Do not expect more than 32 bits of randomness (or anything;-).

Parameters
shhandle
seeda 32 bit seed value for the pseudo-random number generator
periodoptional address to store the size of the enforced period (zero for endlessly freshly generated signal)

◆ syn123_setup_geiger()

MPG123_EXPORT int syn123_setup_geiger ( syn123_handle sh,
double  activity,
unsigned long  seed,
size_t *  period 
)

Set up Geiger counter simulator. This models a speaker that is triggered by the pulses from the Geiger-Mueller counter. That creepy ticking sound.

Parameters
shhandle
activityaverage events per second
seeda 32 bit seed value for the pseudo-random number generator
periodoptional address to store the size of the enforced period (zero for endlessly freshly generated signal)
Returns
success code

◆ syn123_setup_silence()

MPG123_EXPORT int syn123_setup_silence ( syn123_handle sh)

Set up silence. This goes back to the vanilla state.

Returns
success code

◆ syn123_conv()

MPG123_EXPORT int syn123_conv ( void *MPG123_RESTRICT  dst,
int  dst_enc,
size_t  dst_size,
void *MPG123_RESTRICT  src,
int  src_enc,
size_t  src_bytes,
size_t *  dst_bytes,
size_t *  clipped,
syn123_handle sh 
)

Convert between supported encodings. The buffers must not overlap. Note that syn123 converts -1.0 to -127 for 8 bit signed (and analogous for other encodings), but still clips asymmetrically at -128 as that is the range of the type. If you do explicit clipping using syn123_clip(), the resulting range will be symmetrical inside [-1.0:1.0] and hence only down to -127 for 8 bit signed encoding. The conversions only work directly either from anything to double/float or from double/float to anything. This process is wrapped in the routine if a handle is provided, using the fixed mixing buffer in that. Clipping is only handled for floating point to integer conversions. Also, NaN is set to zero on conversion and counted as clipped. The ulaw and alaw conversions use Sun's reference implementation of the G711 standard (differing from libmpg123's big lookup table).

Parameters
dstdestination buffer
dst_encdestination encoding (enum mpg123_enc_enum)
dst_sizesize of destination buffer in bytes
srcsource buffer
src_encsource encoding
src_bytessource buffer size in bytes
dst_bytesoptional address to store the written byte count to
clippedoptional address to store number of clipped samples to
shan optional syn123_handle which enables arbitrary encoding conversions by utilizing the contained buffer as intermediate storage, can be NULL, disabling any conversion not involving floating point input or output
Returns
success code

◆ syn123_db2lin()

MPG123_EXPORT double syn123_db2lin ( double  db)

Convert decibels to linear volume (amplitude factor). This just returns pow(10, db/20) in the supported range. The dB value is limited according to SYN123_DB_LIMIT, with NaN being put at the lower end of the range. Better silent than insanely loud.

Parameters
dbrelative volume in dB
Returns
linear volume factor

◆ syn123_lin2db()

MPG123_EXPORT double syn123_lin2db ( double  volume)

Convert linear volume (amplitude factor) to decibels. This just returns 20*log10(volume) in the supported range. The returned value is limited according to SYN123_DB_LIMIT, with NaN being put at the lower end of the range. Better silent than insanely loud.

Parameters
volumelinear volume factor
Returns
relative volume in dB

◆ syn123_amp()

MPG123_EXPORT int syn123_amp ( void *  buf,
int  encoding,
size_t  samples,
double  volume,
double  offset,
size_t *  clipped,
syn123_handle sh 
)

Amplify given buffer. This multiplies all samples by the given floating point value (possibly converting to/from floating point on the fly, if a handle with the included working buffer is given). Also an offset correction is provided.

Parameters
bufthe buffer to work on
encodingthe sample encoding
samplesnumber of samples
volumelinear volume factor (use syn123_db2lin() for applying a change in dB)
offsetoffset to add to the sample values before multiplication
clippedoptional address to store number of clipped samples to
shoptional handle to enable work on non-float encodings
Returns
success code (e.g. bad encoding without handle)

◆ syn123_clip()

MPG123_EXPORT size_t syn123_clip ( void *  buf,
int  encoding,
size_t  samples 
)

Clip samples in buffer to default range. This only does anything with floating point encoding, but you can always call it without damage as a no-op on other encodings. After this, the samples are guaranteed to be in the range [-1,+1]. NaNs are mapped to zero (and counted as clipped), so they will still sound bad. If you want to hard clip to a smaller range, use syn123_soft_clip() with a width of zero.

Parameters
bufbuffer to work on
encodingsample encoding
samplestotal number of samples
Returns
number of clipped samples

◆ syn123_soft_clip()

MPG123_EXPORT size_t syn123_soft_clip ( void *  buf,
int  encoding,
size_t  samples,
double  limit,
double  width,
syn123_handle sh 
)

Soft clipping / cheap limiting. This limits the samples above the threshold of limit-width with a smooth curve, dampening the high-frequency content of the clipping. This is no proper frequency filter, but just an independent function on each sample value, also ignorant of the channel count. This can directly work on float encodings and does nothing on others unless a handle is provided for on-line conversion.

Parameters
bufbuffer to work on
encodingsample encoding
samplestotal number of samples
limitthe limit to clip to (normally 1 for full scale)
widthsmoothing range
shoptional handle to work on non-float encodings
Returns
number of clipped samples

◆ syn123_interleave()

MPG123_EXPORT void syn123_interleave ( void *MPG123_RESTRICT  dst,
void **MPG123_RESTRICT  src,
int  channels,
size_t  samplesize,
size_t  samplecount 
)

Interleave given number of channels into one stream. A rather trivial functionality, here for completeness. As the algorithm is agnostic to what is actually stored as a "sample", the parameter types are so generic that you could use these functions to arrange huge structs (hence samplesize as size_t) or whatever. If that makes sense is up to you. The buffers shall not overlap!

Parameters
dstdestination buffer
srcsource buffer array (one per channel)
channelschannel count
samplesizesize of one sample
samplecountcount of samples per channel

◆ syn123_deinterleave()

MPG123_EXPORT void syn123_deinterleave ( void **MPG123_RESTRICT  dst,
void *MPG123_RESTRICT  src,
int  channels,
size_t  samplesize,
size_t  samplecount 
)

Deinterleave given number of channels out of one stream. A rather trivial functionality, here for completeness. As the algorithm is agnostic to what is actually stored as a "sample", the parameter types are so generic that you could use these functions to arrange huge structs (hence samplesize as size_t) or whatever. If that makes sense is up to you. The buffers must not overlap!

Parameters
dstdestination buffer array (one per channel)
srcsource buffer
channelschannel count
samplesizesize of one sample (see MPG123_SAMPLESIZE)
samplecountcount of samples per channel

◆ syn123_mono2many()

MPG123_EXPORT void syn123_mono2many ( void *MPG123_RESTRICT  dst,
void *MPG123_RESTRICT  src,
int  channels,
size_t  samplesize,
size_t  samplecount 
)

Simply copies mono samples into an interleaved stream. This might be implemented by a call to syn123_interleave(), it might be optimized to something different. You could have fun measuring that.

Parameters
dstdestination buffer
srcsource buffer
channelschannel count
samplesizesize of one sample (see MPG123_SAMPLESIZE)
samplecountcount of samples per channel

◆ syn123_mixenc()

MPG123_EXPORT int syn123_mixenc ( int  src_enc,
int  dst_enc 
)

Specify floating point encoding to use for preserving precision in intermediate computations for given source and destination encoding. This should return either MPG123_ENC_FLOAT_32 or MPG123_ENC_FLOAT_64, unless an uncertain future adds things like 16 bit fp ... This is what syn123_conv() and syn123_mix() will use internally if intermediate conversion is necessary. Note that 64 bit floating point material will be mixed in 32 bit if the destination encoding does not need more precision.

Parameters
src_encsource/input encoding
dst_encdestination/output encoding
Returns
encoding value, zero if none can be chosen (invalid parameters)

◆ syn123_mix()

MPG123_EXPORT int syn123_mix ( void *MPG123_RESTRICT  dst,
int  dst_enc,
int  dst_channels,
void *MPG123_RESTRICT  src,
int  src_enc,
int  src_channels,
const double *  mixmatrix,
size_t  samples,
int  silence,
size_t *  clipped,
syn123_handle sh 
)

Mix n input channels on top of m output channels. This takes an interleaved input stream and mixes its channels into the output stream given a channel matrix (m,n) where each of the m rows contains the n volume factors (weights) to apply when summing the samples from the n input channels. Sample values are added to what is already present unless initial silence is explicitly requested. This works directly with identical floating point encodings. It may have some optimization to work faster with mono or stereo on either side and slower generic code for arbitrary channel counts. You can use syn123_conv() to convert from/to input/output encodings or provide a syn123_handle to do it on the fly. There are no optimizations for special cases of mixing factors, so you should always be able to predict the number of floating point operations being executed. For fun, you could give the same problem to a BLAS implementation of your choice and compare the performance;-)

Parameters
dstdestination buffer
dst_encoutput sample encoding, must be MPG123_ENC_FLOAT_32 or MPG123_ENC_FLOAT_64 unless a syn123_handle is provided
dst_channelsdestination channel count (m)
srcsource buffer
src_encinput sample encoding, must be MPG123_ENC_FLOAT_32 or MPG123_ENC_FLOAT_64 unless a syn123_handle is provided
src_channelssource channel count (n)
mixmatrixmixing factors ((m,n) matrix), same encoding as the audio data
samplescount of samples (PCM frames) to work on
silenceSet to non-zero value to intialize the output to a silent signal before adding the input.
clippedoptional address to store number of clipped samples to (in case of mixing to an integer encoding)
shan optional syn123_handle which enables work on non-float encodings by utilizing the contained buffer as intermediate storage, converting to/from float transparently; Note that this may limit the amount of channels depending on the fixed internal buffer space. As long as you have up to 128 channels, you should not worry.
Returns
success code (e.g. bad encoding, channel counts ...)

◆ syn123_setup_filter()

MPG123_EXPORT int syn123_setup_filter ( syn123_handle sh,
int  append,
unsigned int  order,
double *  b,
double *  a,
int  mixenc,
int  channels,
int  init_firstval 
)

Set up a generic digital filter.

This takes a filter order N and coefficient set to prepare the internal state of a digital filter defined by the transfer function

\[ H(z) = \frac {b_0 + b_1 z^{-1} + ... + b_N z^{-N}} {1 + a_1 z^{-1} + ... + a_N z^{-N}} \]

It is your task to come up with fun values for the coefficients b_n and a_n to implement various FIR and IIR filters.

Since it is easy to do and useful, this configures not only a single filter but a chain of them. If you do configure a chain, the choice of mixenc and channels must match. No conversion between filters.

Parameters
shmandatory handle
appendif true, append a filter to the chain, fresh chain otherwise
orderfilter order N (filter length minus one)
bnominator coefficients, starting with b_0 (order+1 elements)
adenominator coefficients, starting with a_0=1 (order+1 elements). It is an error to provide a sequence that does not start with 1. For a non-recursive (FIR) filter, you can set all following values from a_1 on to zero or choose to provide a NULL pointer.
mixenceither MPG123_ENC_FLOAT_32 or MPG123_ENC_FLOAT_64 for computation in single or double precision, can be zero to refer to the value demanded by an already present filter
channelsnumber of channels in the audio signal, can be zero to refer to the value demanded by an already present filter
init_firstvalIf non-zero, initialize the filter history with a constant stream of the first encountered sample instead of zero.
Returns
success code

◆ syn123_query_filter()

MPG123_EXPORT int syn123_query_filter ( syn123_handle sh,
size_t  position,
size_t *  count,
unsigned int *  order,
double *  b,
double *  a,
int *  mixenc,
int *  channels,
int *  init_firstval 
)

init_firstval is the effective setting (extreme coefficients may remove the distinction)

◆ syn123_drop_filter()

MPG123_EXPORT void syn123_drop_filter ( syn123_handle sh,
size_t  count 
)

drop the n last filters

◆ syn123_filter()

MPG123_EXPORT int syn123_filter ( syn123_handle sh,
void *  buf,
int  encoding,
size_t  samples 
)

Apply a prepared digital filter.

This applies the filter prepared by syn123_setup_filter to yur provided buffer in single or double precision float. Handing in a non-float encoding is an error. You are supposed to convert and clip before/after applying the filters.

If you got no filters configured, this always succeeds and does nothing.

Parameters
shhandle
bufaudio data to work on (channel count matching what was given to mpg123_setup_filter())
encodingaudio encoding
samplescount of samples (PCM frames) in the buffer
Returns
success code

◆ syn123_setup_resample()

MPG123_EXPORT int syn123_setup_resample ( syn123_handle sh,
long  inrate,
long  outrate,
int  channels,
int  dirty,
int  smooth 
)

Set up the resampler.

This works independently of the signal generators. You can combine syn123_setup_resample() with syn123_setup_geiger(), for example.

People can get worked up a lot about differing algorithms for resampling, while many folks can actually bear the simple drop/repeat method and most probably do not bother about the distortions from linear resampling. A testament to this is that in the 18 years of me maintaining mpg123, I got bugged about the missing dithering and on subtle bias in shuffling a playlist, but people seem to insist on using the NtoM resampoler inside libmpg123, despite me warning about its horrible consequences for audio quality. It is a plain drop-sample implementation. The only good things to say about it is that it is cheap and is embedded with the sample-accurate decoder so that you do not have to worry about offsets in terms of input and output samples.

Anyhow, this is my take on a reasonably good and efficient resampler that is neither the best-sounding, nor the fastest in terms of CPU time, but gets by without significant latency. It needs far less computation than usual high-quality windowed-sinc resampling (libsamplerate), but cannot beat libsoxr with its FFT-based approach. The less stringent dirty mode (using only a 72 dB lowpass filter, in practice still close to CD-DA quality) comes quite close, though.

The selling point is that it produces output samples as soon as you start feeding, without any buffering of future samples to fill a window for the FIR filter or the Fourier transform. It employs IIR filters for low-passing, possibly in multiple stages for decimation, and optimized interpolation formulas using up to 6 points. These formulas, based on research by Olli Niemitalo using using Differential Evolution, are what enables a dynamic range of 108 dB, well above 16 bit CD-DA quality. Simple cubic splines after low-passing distort up to around -40 dB in my tests.

There is some effective signal delay well below 10 samples. The impulse response is about 3 samples late, so this is well inside the realm of (nonlinear) phase shift. The phase distortion looks bad on paper but does not matter much in the intended domain of application: the final change in sampling rate before playback on audio hardware, the last filter that is applied before the sound hits the speakers (or all the other filters implemented in your audio harware, that you can choose to be ignorant about). Use better resamplers for mixing in the studio. Use better resamplers for converting files on disk. For live playback, consider this one because it is good enough, fast enough, cheap enough.

Note that if you call this function repeatedly, the internal history is only cleared if you change anything besides the sampling rates. If only the rates change, the state of the resampler is kept to enable you to continue on prior data. This means you can vary the resampling ratio during operation, somewhat smoothly depending on your buffer size.

Also note that even on identical input and output rates, the resampler will apply the full filtering as for any ratio close to that, including oversampling. No special shortcuts.

A returned error guarantees that the internal resampler setup has been cleared (frees a little bit of memory). You can provide zero inrate, outrate, and channel count at the same time to that effect without an error message being produced (but still SYN123_BAD_FMT being returned).

Parameters
shmandatory handle
inrateinput sample rate (nominator of ratio)
outrateoutput sample rate (denominator of ratio)
channelsnumber of interleaved channels
dirtyEnable (!= 0) the dirty mode for even more 'good enough' resampling with less computing time. Offers -72 dB low pass attentuation, worst-case distortion around that, too, and 85% worst-case bandwidth. With this set to zero, the normal mode is used, offering at least 108 dB dynamic range and worst-case bandwidth above 84%.
smoothEnable (!=0) extra code smoothing the resampler response to on-the-fly changes of sampling rate ratio. This involves keeping some per-stage history to bootstrap additional decimation filters and the changed final lowpass/interpolation.
Returns
success code

◆ syn123_resample_maxrate()

MPG123_EXPORT long syn123_resample_maxrate ( void  )

Return the maximum allowed value for sample rates given to the resampler.

Not every possible value of the underlying data type is a valid sample rate for the resampler. It needs some headroom for computations. This function returns the maximal rate you can specify. For 32-bit long, this will be above 1e9, for 64-bit long above 4e18. The minimum is 1, of course. So, with 32 bit, you can speed up/down by a factor of one million if you want to keep 0.1% precision in the rates.

Returns
upper sample rate limit

◆ syn123_resample_count()

MPG123_EXPORT size_t syn123_resample_count ( long  inrate,
long  outrate,
size_t  ins 
)

Give upper limit for output sample count from the resampler.

Since there is some rounding involved, the exact number of output samples from the resampler, being given a certain amount of input samples, can vary (one more or less than expected). This function is here to give you a safe output buffer size given a certain input buffer size. If you intend to vary the output rate for a fixed input rate, you may compute the output buffer size for the largest intended output rate and use that throughout. The same applies to the input sample count. A return value of zero indicates an error (zero, negative, or too large rate given) unless the given input sample count is also zero. The resampler only produces output when given new input.

Parameters
inrateinput sample rate
outrateoutput sample rate
insinput sample count for one buffer
Returns
number of maximum output samples for one buffer, or zero if no sensible value exists

◆ syn123_resample_history()

MPG123_EXPORT size_t syn123_resample_history ( long  inrate,
long  outrate,
int  dirty 
)

Return the amount of input samples needed to recreate resample filter state.

This returns a number of input samples that should fill the internal filter states good enough for output being close to that produced from the full input since the beginning. Since recursive filters are employed, there is no exact number that recreates a state apart from the full sequence that created it the first time. This number here shall be more than the non-recursive history, but not by a huge factor. For extreme cases, this value may be saturated at SIZE_MAX and thus smaller than what is demanded by the above definition. It is assumed that you define a maximal practical size of history to consider for your application, anyway.

Parameters
inrateinput sample rate
outrateoutput sample rate
dirtyswitch for dirty resampling mode (see syn123_setup_resample())
Returns
number of input samples to fill history, zero on error

◆ syn123_resample_incount()

MPG123_EXPORT size_t syn123_resample_incount ( long  input_rate,
long  output_rate,
size_t  outs 
)

Compute the minimal input sample count needed for given output sample count.

The reverse of syn123_resample_count(), in a way. This gives you the minimum amount of input samples to guarantee at least the desired amount of output samples. Once you got that, ensure to call syn123_resample_count() to get a safe buffer size for that amount of input and prepare accordingly. With this approach, you can ensure that you get your realtime output device buffer filled with each loop run fetching a bit of input, at the expense of handling some additional buffering for the returned sample counts above the minimum.

Parameters
input_rateinput sample rate
output_rateoutput sample rate
outsdesired minimal output sample count for one input buffer
Returns
number of minimal input samples in one buffer, or zero if no sensible value exists (invalid input parameters, or zero outs)

◆ syn123_resample_fillcount()

MPG123_EXPORT size_t syn123_resample_fillcount ( long  input_rate,
long  output_rate,
size_t  outs 
)

Compute the input sample count needed for close to given output sample count, but never more.

Call this to get a safe fixed count of input samples to make best use of a preallocated output buffer, filling it as much as safely possible. This can also be achieved by calling syn123_resample_incount() and reducing the value until syn123_resample_count() fits into your buffer.

Parameters
input_rateinput sample rate
output_rateoutput sample rate
outsdesired output sample count for one input buffer
Returns
number of input samples in one buffer, or zero if no sensible value exists (invalid input parameters, or zero outs)

◆ syn123_resample_maxincount()

MPG123_EXPORT size_t syn123_resample_maxincount ( long  input_rate,
long  output_rate 
)

Compute the maximum number of input samples for a resampling buffer.

Upsampling means that you will get more output samples than input samples. This larger number still needs to fit into the data type for sample counts. So please don't feed more than the value returned here.

Parameters
input_rateinput sample rate
output_rateoutput sample rate
Returns
maximum safe input sample count

◆ syn123_resample_out()

MPG123_EXPORT size_t syn123_resample_out ( syn123_handle sh,
size_t  ins,
int *  err 
)

Give exact output sample count for feeding given input now.

This gives you the exact number of samples you will get returned when feeding the resampler the given additional input samples now, given the current resampler state contained in the handle.

On error, zero is returned and the error code is set to a nonzero syn123 error code.

Parameters
shsyn123 handle
insinput sample count
errlocation to store error code
Returns
output sample count

◆ syn123_resample_in()

MPG123_EXPORT size_t syn123_resample_in ( syn123_handle sh,
size_t  outs,
int *  err 
)

Give minimum input sample count needed now for given output.

This give you the minimal number of input samples needed right now to yield at least the specified amount of output samples. Since one input sample can result in several output sampels in one go, you have to check using syn123_resample_out() how many output samples to really expect.

On error, zero is returned and the error code is set to a nonzero syn123 error code.

Parameters
shsyn123 handle
outsoutput sample count
errlocation to store error code
Returns
minimal input sample count

◆ syn123_resample_total64()

MPG123_EXPORT int64_t syn123_resample_total64 ( long  inrate,
long  outrate,
int64_t  ins 
)

Give exact output sample count for total input sample count.

Use this to determine the total length of your output stream given the length of the input stream. The computation is exact. But: It is only valid for a constant sampling rate ratio. If you play with that during runtime, you need to figure out your output offset yourself.

Parameters
inrateinput sample rate
outrateoutput sample rate
insinput sample count for the whole stream
Returns
number of output samples or -1 if the computation fails (bad/too large sampling rates, integer overflow)

◆ syn123_resample_intotal64()

MPG123_EXPORT int64_t syn123_resample_intotal64 ( long  inrate,
long  outrate,
int64_t  outs 
)

Give minimum input sample count for total output sample count.

You need to feed at least that amount of input samples to get the desired amount of output samples from the resampler. Depending on the resampling ratio, you may in fact get more than the desired amount (one input sample being worth multiple output samples during upsampling) so make sure to call syn123_resample_total() to get the exact number of samples you need to prepare for. Again, the output offset is only meaninful for a constant sampling rate ratio.

Parameters
inrateinput sample rate
outrateoutput sample rate
outsoutput sample count for the whole stream
Returns
number of input samples or -1 if the computation fails (bad/too large sampling rates, integer overflow)

◆ syn123_resample()

MPG123_EXPORT size_t syn123_resample ( syn123_handle sh,
float *MPG123_RESTRICT  dst,
float *MPG123_RESTRICT  src,
size_t  samples 
)

Resample input buffer to output buffer.

This executes the resampling configured by syn123_setup_resample(). The input and output encoding is fixed at single-precision float (MPG123_ENC_FLOAT_32) and multiple channels are interleaved. There is no implicit conversion of other encodings since the fixed internal buffers for that may not fit your chosen extreme resampling ratios. Also, dealing with double precision does not make sense with the mathematical limitations of the employed filters.

You are responsible for having your buffers prepared with the correct sizes. Use syn123_resample_count() to ensure that you are prepared for the correct number of output samples given your input sample count.

Also, ensuring a minimal number of input samples using syn123_resample_incount() helps to identify an error situation where zero samples are returned (which would be valid for low input sample count). The only error apart from handing in an invalid/unprepared handle is a too large number of input samples. Check syn123_resample_maxincount().

Parameters
shhandle with prepared resampling method If this is NULL or if the resampler has not been initialized before, the function returns zero instead of crashing randomly.
dstdestination buffer
srcsource buffer
samplesinput samples (PCM frames) in source buffer
Returns
number of output samples (PCM frames)

◆ syn123_swap_bytes()

MPG123_EXPORT void syn123_swap_bytes ( void *  buf,
size_t  samplesize,
size_t  samplecount 
)

Swap byte order between little/big endian.

Parameters
bufbuffer to work on
samplesizesize of one sample (see MPG123_SAMPLESIZE)
samplecountcount of samples

◆ syn123_host2le()

MPG123_EXPORT void syn123_host2le ( void *  buf,
size_t  samplesize,
size_t  samplecount 
)

Convert from host order to little endian.

Parameters
bufbuffer to work on
samplesizesize of one sample (see MPG123_SAMPLESIZE)
samplecountcount of samples

◆ syn123_host2be()

MPG123_EXPORT void syn123_host2be ( void *  buf,
size_t  samplesize,
size_t  samplecount 
)

Convert from host order to big endian.

Parameters
bufbuffer to work on
samplesizesize of one sample (see MPG123_SAMPLESIZE)
samplecountcount of samples

◆ syn123_le2host()

MPG123_EXPORT void syn123_le2host ( void *  buf,
size_t  samplesize,
size_t  samplecount 
)

Convert from little endian to host order.

Parameters
bufbuffer to work on
samplesizesize of one sample (see MPG123_SAMPLESIZE)
samplecountcount of samples

◆ syn123_be2host()

MPG123_EXPORT void syn123_be2host ( void *  buf,
size_t  samplesize,
size_t  samplecount 
)

Convert from big endian to host order.

Parameters
bufbuffer to work on
samplesizesize of one sample (see MPG123_SAMPLESIZE)
samplecountcount of samples

◆ syn123_resample_expect()

MPG123_EXPORT syn123_ssize_t syn123_resample_expect ( syn123_handle sh,
size_t  ins 
)

Give exact output sample count for feeding given input now.

Old variant of syn123_resample_out() that (ab)uses ssize_t.

Deprecated:
Use syn123_resample_out() instead. The return of errors (integer overflow in calculation)is broken, as both the error codes and the valid results are positive integers. I screwed up.
Parameters
shsyn123 handle
insinput sample count
Returns
output sample count or error code, hard to distinguish

◆ syn123_resample_inexpect()

MPG123_EXPORT syn123_ssize_t syn123_resample_inexpect ( syn123_handle sh,
size_t  outs 
)

Give minimum input sample count needed now for given output.

Old variant of syn123_resample_in() that (ab)uses ssize_t.

Deprecated:
Use syn123_resample_in() instead. The return of errors (integer overflow in calculation)is broken, as both the error codes and the valid results are positive integers. I screwed up.
Parameters
shsyn123 handle
outsoutput sample count
Returns
minimal input sample count or error code, hard to distinguish

◆ syn123_resample_total()

MPG123_EXPORT off_t syn123_resample_total ( long  inrate,
long  outrate,
off_t  ins 
)

Give exact output sample count for total input sample count.

This is syn123_resample_total64() with shape-shifting off_t, possibly renamed by macro. For type safety, use the former.

Deprecated:
Use syn123_resample_total64() instead.
Parameters
inrateinput sample rate
outrateoutput sample rate
insinput sample count for the whole stream
Returns
number of output samples or -1 if the computation fails (bad/too large sampling rates, integer overflow)

◆ syn123_resample_intotal()

MPG123_EXPORT off_t syn123_resample_intotal ( long  inrate,
long  outrate,
off_t  outs 
)

Give minimum input sample count for total output sample count.

This is syn123_resample_intotal64() with shape-shifting off_t, possibly renamed by macro. For type safety, use the former.

Deprecated:
Use syn123_resample_intotal64() instead.
Parameters
inrateinput sample rate
outrateoutput sample rate
outsoutput sample count for the whole stream
Returns
number of input samples or -1 if the computation fails (bad/too large sampling rates, integer overflow)
Hopefully valid HTML! Valid CSS!